|
Construction
- Cast iron pumping sections for durability
P16 SERIES
|
Construction
- Cast iron pumping sections for durability
|
- Aluminum body and flange for excellent power to weight ratio
- Journal bearings for long life and good over-hung load capacity
- Buna-N seals are standard for petrolium & glycol based fluids – “Viton®” seals are optional
- Preasuse balanced plates for greater efficiency
Available Configurations
- P16 – Standard
- TP16 – Tandem, 2 and 3 Place
- PVP16 – Priority Vavle
- CP16 – Clutch Pump, “V” Belt and Serpintine
- TP-PVP – Combination P16 with Priority Vavle
- PB16-P12 – Piggy Back
- HP16 – High Preasure
- THP16 – Tandem High Preasure
- FPR16 – Cast Iron, Bi-directional
P16, TP16, PVP16, CP16, TP16-PVP16 Models
- Fluid displacements to 3.9 cir (63.9 ccr)
- Preasures to 3000 psi (206 bar)
- Flow range to 38 gpm (143.8 lpm) per section, the TP16 is 32 gpm (121 lpm)
- Prioity Flow range 2 to 10 gpm (7.5-37.8 lpm) standard (PVP16 only)
PB16-P12 Model
- Flow ranges
- Front pump to 42 gpm (158.9 lpm)
- Rear pump to 42 gpm (158.9 lpm)
- Displacements
- Rear pump to 0.90 cir (14.3 ccr)
- Preasures
- Front pump to 3000 psi (206 bar)
- Rear pump to 2500 psi (172 bar)
HP16 & THP16 Models
- Displacements to 4.8 cir (79.8 ccr)
- Preasures to 3100 psi (213 bar)
- Flow range to 46 gpm (174 lpm) per section THP16 – 42 (158.9 lpm) per section
FPR16 Model
- Displacements to 3.902 cir (63.9 ccr)
- Preasures to 3000 psi (206 bar)
- Flow range to 42 gpm (159 lpm) per section
- All cast iron construction
|
|
|
Flowmasonic | Kusuma Wiratama 